All industries
Industry solution
Semiconductor & Cleanroom Pipe Clamps
ISO Class 5+ compatible stainless clamps for UHP gas, DI water and chemical delivery lines.
Semiconductor fabs operate at ISO Class 5 or stricter. Pipe supports that shed particles disqualify the install. NIBRO supplies electropolished 316L clamps with degreased, double-bagged delivery — ready to install inside the cleanroom airlock.
Why NIBRO
Factory direct since 2006
EU stainless · EN 10204 3.1 traceable
DIN 3567 + DIN 3570 compliant
ISO 9001:2015 certified production
Worldwide shipping in 22 countries
Section 01
Cleanroom delivery protocol
Every clamp is degreased in alkaline ultrasonic bath, rinsed in DI water, oven-dried, and double-bagged in clean ESD-safe PE. Outer bag is wiped, inner bag remains sealed until inside the cleanroom. Particle count guarantee: ISO Class 5 equivalent.
Matched products from stock
8 clamps that fit this application
diepe kapbeugel 20x316
Kapbeugel
316 · 15× matenv.a. €2.60
diepe kapbeugel 20x -316
Kapbeugel
316 · 1× matenv.a. €3.30
diepe kapbeugel 25x316
Kapbeugel
316 · 12× matenv.a. €2.88
diepe kapbeugel 30x316
Kapbeugel
316 · 3× matenv.a. €3.76
diepe kapbeugel 40x316
Kapbeugel
316 · 9× matenv.a. €7.28
diepe kapbeugel 25x -316
Kapbeugel
316 · 6× matenv.a. €12.00
diepe kapbeugel 50x316
Kapbeugel
316 · 8× matenv.a. €16.14
DIN1593 diepe kapbeugel 50x316
Kapbeugel
316 · 1× matenv.a. €24.32
FAQ
Frequently asked
All NIBRO 316L clamps are degreased to < 5 mg/m² hydrocarbon residue (NACA Class 100). Outgassing is below typical semiconductor specifications.
Ready to spec your supports?
Talk to our engineering team. Factory direct from Oisterwijk, Netherlands.